Ativa A10MC19 Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin Penghancur Kertas Ativa A10MC19. Ativa A10MC19 14 halaman. 10-sheet micro-cut shredder
Halaman Cetak
OPERATION
Shredding operation:
Plug into grounded standard US
household power outlet (120 Volt).
Insert one credit card at a time
Make sure you do not exceed sheet
count per pass (10 sheets max). Insert
into the middle of the feed slot.
paper as straight as possible into
feed slot and release.
Special Feature:
Overload feature
The motor will immediately stop and start to auto-reverse for paper release. Press the
Reverse button to reverse mode if needed and remove paper at a 45 degree angle.
Control Switch:
Power On/Off:
Press this button to control
power ON/OFF.
3
ENGLISH
Press master switch on back
Press Auto button to Power
of unit to ON to Power ON
ON shredder.
shredder.
Press master switch to OFF to
Power OFF shredder.
Reverse:
The shredder runs in reverse when
this button is pressed.
Forward:
The shredder runs in forward when
this button is pressed.
OPERATION
LED Status Indicators:
Power On:
Blue light – Power light will activate when switched to Auto mode.
Overheat:
Red light – Shredder has reached maximum running time and is overheating.
If this happens, switch the shredder off for 50 minutes or longer before resuming
normal operation.
Bin Full:
Shredder bin is full and
Blue light flashing –
operate until bin is emptied.
Overload:
Red light flashing –
The motor will immediately stop and start to auto-reverse for
paper release. Press the Reverse button to reverse mode if needed and remove paper
at a 45 degree angle.
should be emptied. Shredder will not
ENGLISH
4