ATK 260LQ 1995 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sepeda motor ATK 260LQ 1995. ATK 260LQ 1995 18 halaman.

Halaman Cetak

Engine Stop:

SUSPENSION

Setting the fork oil level:

1) Push the black kill button on the left

side of the handlebar.

Fork oil:

Your new ATK's fork is supplied with

5-weight suspension ﬂuid. 7.5-weight

ﬂuid may be substituted if a ﬁrmer ride

is desired. Use only a high-grade sus

pension ﬂuid such as Bel-Ray HVI or

Spectro.

Fork oil level:

Minimum oil level

Maximum oil level

Stock oil level

6.70 inches (170mm)

4.72 inches (120mm)

5.10 inches (130mm)

Effects of oil level:

Raising the fork oil level increases the

fork's resistance to bottoming and

generally makes the suspension feel

stiffer during the last half of its travel.

Lowering the oil level softens the last

half of the travel.

The fork legs must be removed from

the motorcycle to accurately set the oil

level. Prior to fork removal, the forks

caps should be loosened (after loos

ening the top clamp's pinch bolts).

1) Remove the fork legs and one fork

cap.

2) Push the outer tube down a couple

of inches and remove the spring-

retainer clips and the spring preload

spacers.

3) Slowly remove the fork spring from

the fork.

4) Push the damper cartridge and

outer tube to the bottom of their travel,

then raise the outer tube's top edge

ﬂush with the top of the damper car

tridge top.

5) Insert a narrow, steel rule into the

fork between the damper cartridge

and the wall of the outer tube, stop

ping at the 8-inch mark on the rule.

6) Carefully remove the rule and note

ATK 1995 Owner' s Manual