Dreiha CoolingBox CBX18 Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Pembeku Dreiha CoolingBox CBX18. Dreiha CoolingBox CBX18 12 halaman.

Halaman Cetak
Error Code
Possible Cause
Low voltage to fridge
F1
F2
Condenser Fan Faulty
F3
Compressor over pressure
F4
Compressor not starting
F5
Over Temperature of the compressor &
electronics
F7
Temperature Sensor Faulty
Standby mode, Press the "SET" button until it displays "E1". Press the "SET" button, it will display settings of "E1",
"E2", "E3", "E4", in accordance with the order cycle. Choose the setting you need, and press "UP" or "DOWN" button
to change and set the parameter.
Setting
Function
E1
Lowest temperature setting
E2
Highest temperature setting
E3
Temperature return setting
E4
Soft start setting
E5
Fahrenheit and Celsius setting
E6
Temperature compensation for
temperature set ≥7℃
E7
Temperature compensation for
temperature set range -7℃~-12℃
E8
Temperature compensation for
temperature set range ≤-13℃
Note: Displayed temperature= detected temperature+ temperature compensation
The Fridge/Freezer has switched off due to an internal fault.
Contact After Sales
Support

ERROR CODE INFORMATION

OTHER SETTINGS

Solution
DC - Increase voltage of DC power
source/Check all connections
AC - Replace defective 240V AC Power adaptor
Contact After Sales Support to arrange repair
Disconnect power to the fridge for 20 minutes
& attempt to re-start
Contact After Sales Support to arrange repair
Disconnect power to the fridge for 20 minutes
& attempt to re-start
Contact After Sales Support to arrange repair
Setting Range
-40℃~Highest temperature
setting
Lowest temperature
setting~40℃
1~10℃
0~10 minutes
F or C
-10℃~10℃
-10℃~10℃
-10℃~10℃
9
Factory Default
-20℃
+20℃
3℃
2 minutes
C
0℃
0℃
0℃