Carp Royal 003 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mobil Mainan Bermotor Carp Royal 003. Carp Royal 003 8 halaman. Intelligent remote control bait boat

Halaman Cetak
Carp Royal 003 Panduan Pengguna
User Manual of the Intelligent Remote
Control Bait boat
Icons corresponding information
Number
Icon description
1
Water depth
2
Water temperature
3
Number of GPS
4
Fish information
5
River bed information
6
GPS settings
7
Current latitude and longitude of the boat
8
Target point latitude and longitude
9
Boat status (STOP/MANUAL/AUTO/GPS)
10
The distance from the boat to the HOME point
11
The distance of the boat from the target point
12
Boat status indication
13
The position of the boat relative to the remote control
14
Remote control serial number and version information
15
Boat serial number and version information
Operation interface switching:
1. Press the "operation interface switching" button to switch between the GPS interface and the main
interface.
2.Click the menu button (▲/▼) to enter the menu interface, and select "EXIT" menu to exit the menu
interface.
10
5.Menu interface operation
Click the menu button (▲/▼) to enter the menu interface, and set the menu with the power button
CALIBRATE BOAT COMPASS:Choose this menu and press the power button to enter
into the boat compass calibration interface.Press the power button again,the boat will
1
start calibration by turning around automatically in the water.When the calibration is
finished,the RC screen will exit from the calibration interface automatically.
CALIBRATE RC COMPASS:Choose this menu and press the power button to enter into
the RC compass calibration interface.Press the power button again,turn around the
2
Remote control in 360 degrees and move the remote control up and down to calibrate the
RC compass.When the calibration is finished,the RC screen will exit from the
calibration interface automatically.
BOAT BATTERY:Choose this menu,then press the power button to enter into the boat
battery type interface.Press the "▲ " or "▼" button to choose the battery type,then
3
press the power button to confirm the selection.
PARING MODE:Turn on the boat,choose this menu and press the power button to enter
into the channel selecting menu.Press the
channel,then press the power button to confirm the selection,the boat will start paring
4
with the RC(Make sure that the boat is switched on when paring).During paring,the boat
light will be flickering.When paring is finished(success or fail),the interface will stay
for 5 seconds and then jump to the main interface.
EXIT:Choose this menu,then press the power button to exit the menu interface.
5
User Manual of the Intelligent Remote
Control Bait boat
"▲ " or "▼"
button to choose the
11