Electrolux EGT6647 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Electrolux EGT6647. Electrolux EGT6647 20 halaman.
Juga untuk Electrolux EGT6647: Panduan Pengguna (20 halaman)

Halaman Cetak

www.electrolux.com

CAUTION!

Make sure that pot handles

are not above the front edge

of the cooktop.

CAUTION!

Make sure that the pots are

placed centrally on the

burner in order to get

maximum stability and to get

lower gas consumption.

CAUTION!

Liquids spilt during cooking

can cause the glass to

break.

6. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

6.1 General information

• Clean the hob after each use.

• Always use cookware with clean

bottom.

• Scratches or dark stains on the

surface have no effect on how the hob

operates.

• Use a special cleaner applicable for

the surface of the hob.

WARNING!

Do not use knives, scrapers

or similar instruments to

clean the surface of the

glass or between the rims of

the burners and the frame (if

applicable).

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

6.2 Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

5.2 Diameters of cookware

Use cookware with

diameters applicable to the

size of burners.

Burner

Rapid

Semi-rapid (rear right)

Semi-rapid (front right) 140 - 180

Auxiliary

Be very careful when

you replace the pan

supports to prevent the

hob top from damage.

2. The enamel coating occasionally can

have rough edges, so be careful

when you wash the pan supports by

hand and dry them. If necessary,

remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

supports are aligned with the centre

of the burner.

6.3 Removing pan supports

After cleaning hobs, make sure that pan

supports are in a correct position. In

order to properly place the pan supports,

make sure that an arm of the pan

support is positioned in correspondence

with the grips placed at the base of the

burner as shown in the picture. This way,

the pan support will be stable and fixed.

Diameter of

cookware

(mm)

180 - 240

140 - 240

100 - 180