Bosch GSB 10.8-2-LI Professional Manual Petunjuk Asli - Halaman 5
Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Bor Bosch GSB 10.8-2-LI Professional. Bosch GSB 10.8-2-LI Professional 13 halaman.
Juga untuk Bosch GSB 10.8-2-LI Professional: Manual Petunjuk Asli (13 halaman), Manual Petunjuk Asli (14 halaman), Manual Petunjuk Asli (13 halaman)
Halaman Cetak
Symbol
Meaning
Recommended chargers
Delivery Scope
Combination cordless drill.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic and
for impact drilling in brick, brickwork and masonry.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Technical Data
The technical data of the machine are listed in the table on
page 157.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendments and complies with the following
standards: EN 60745-1, EN 60745-2-1, EN 60745-2-2.
Mounting and Operation
Action
Removing the battery
Inserting the battery
Mounting application tools
Reversing the rotational direction
Setting the torque
Setting the operating mode
Gear selection, mechanical
Switching On and Off
Checking the battery charge condition
Selecting Accessories
Bosch Power Tools
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
15.10.2014
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 157.
Sound emission values determined according to
EN 60745-2-1.
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Figure
1
2
3
4
5
6
7
8
9
–
English | 11
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Page
158
158
158
159
159
160
160
161
161
162
1 609 92A 0WY | (15.10.14)