dreo DR-HAF003S Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kipas angin dreo DR-HAF003S. dreo DR-HAF003S 13 halaman. Smart pedestal air circulator fan

Halaman Cetak
dreo DR-HAF003S Panduan Pengguna
ASSEMBLING
YOUR PEDESTAL
AIR CIRCULATOR
Assembly Instructions
parts by following the steps below.
1
2
Thread the screw through the flat
washer, insert into the base, and
use the included screwdriver to
drive the screw into the bottom of
the air circulator.
3
2
Push the air circulator into the
base by aligning the cutout on
the bottom of the air circulator
with the jutting point in the
middle of the base.
3
Adjustable:
0-5.9 inch
Put the air circulator upright, hold
the main body while rotating the
Adjustment Collar counterclockwise
to raise or lower the air circulator to
the desired height.
4
Tighten the adjustment collar by rotating clockwise. Plug the power
adapter into the power (located at the back of the air circulator), and into
the power outlet.
CAUTION
Do not operate the air
circulator if the base has not
been installed.
4