dreo DR-KAF002 Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penggorengan dreo DR-KAF002. dreo DR-KAF002 13 halaman. Smart control air fryer
Troubleshooting
Problem
Make sure the air fryer is plugged in.
The air fryer will not turn on.
Push the baskets securely into the air fryer.
Place smaller batches of ingredients into the basket.
If the basket is overstuffed, then ingredients will be
Foods are not completely
undercooked.
cooked.
Increase cooking temperature or time.
Ingredients that are stacked on top of each other or
close to each other need to be shaken during cooking.
Foods are cooked unevenly.
The non-stick plate should be placed in the basket.
Foods are not crispy after air
Spraying or brushing a small amount of oil on foods
frying.
can increase crispiness (see Cooking Guide, page 16).
Temperature won't go higher
The max temperature is 200°C for STEAK only. Please
than 200° C.
refer to Preset Default Settings (Page 11)
20
Possible Solution
Problem
The air fryer may produce some white smoke when
you use it for the first time. This is normal.
Make sure the basket and the non-stick plate is
White smoke is coming out of
cleaned properly and not greasy.
the air fryer.
Frying greasy foods will cause oil leaks into the basket.
This oil will produce white smoke. This is normal and
should not affect cooking.
Dark smoke is coming out of
Immediately unplug your air fryer. Food is burning. Wait
the air fryer.
for smoke to clear before pulling the basket out.
Remove the basket from the unit to pause the cooking
How do I pause or stop the
and place it back to resume. Press and hold POWER
cooking?
for 2 seconds to turn off the air fryer.
Is the basket safe to put on
Use caution when handling, and place on heat-safe
my countertop?
surfaces only.
The Display shows Error Code
There is an open circuit in the temperature monitor.
"E1".
Contact Customer Support.
The Display shows Error Code
There is a short circuit in the temperature monitor.
"E2".
Contact Customer Support.
If your problem is not listed or still persists, contact our Customer Support at
Possible Solution
21