Electrolux Profiline GK38TSIO Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Electrolux Profiline GK38TSIO. Electrolux Profiline GK38TSIO 16 halaman. Electrolux induction hob
Juga untuk Electrolux Profiline GK38TSIO: Spesifikasi (18 halaman)
Halaman Cetak
4 electrolux
edge of the glass ceramic. Do not extend
it. Let stay the cut ends in the middle of
one side. When, you cut it to length (add
some mm), push the two ends together.
TO ATTACH THE SEAL TO THE
RABBET
• Clean the rabbet in the work surface.
• Bond the seal stripe supplied on the up-
per surface of the rabbet along the edges
of the cut out section.
ASSEMBLY
50 mm
• Cut the seal stripe into four pieces in rela-
tion to the length of the edges of the rab-
bet.
• For the four corners of the rabbet the
ends of the seal stripes must be cut into
mitres. Do not bond the ends over one
another.
• Bond the seal stripe flush into the corner
of the rabbet. Make sure that no silicon
compound can get below the appliance
when grouting.
min.
500mm
min.
50mm
R 5mm
+1
490
mm
360
50 mm
min.
50mm
min.
5mm
600mm
+1
mm