Dresser Texsteam TA 0179 Panduan Pemasangan & Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Pengontrol Dresser Texsteam TA 0179. Dresser Texsteam TA 0179 8 halaman. Multipoint injection controller
Halaman Cetak
System Specifications
Injection Points
Up to 4
Available in
2, 3, & 4 Points
Volume
Via ICIP Controller - Pump must be sized
Adjustment
to Total Volume of all Points
Each Point can be set at specific
percentage from Total Pump Volume
Op. Temperature
-40F° to 140F°
Max Pressure
2500 psi
Seal Material
Buna/Teflon
Power
10 Watts
Consumption
Available with
ICIP & HiCIP Solar Pumps,
TXTPMCICIPAC, & TXTPMCICIP12V
Solenoid Ports &
Explosion-Proof (NEMA 7)
Manifold
Valves Class I&II Groups C, D, E, F & G,
Division 1&2
Pipe Connections
1/4" NPT
Industrial Products Group
Texsteam Pumps
16240 Port Northwest Drive
Houston, TX 77041
T: 832-590-2306
Toll Free: 1-800-945-9898
F: 713-849-2879
© 2020 Natural Gas Solutions North America, LLC – All rights reserved. Natural
Gas Solutions reserves the right to make changes in specifications and features
shown herein, or discontinue the product described at any time without notice
or obligation. Contact your Dresser Natural Gas Solutions representative for the
most current information. The Dresser Logo and all Trademarks containing the
term "Dresser" are the property of Dresser, LLC, a subsidiary of Baker Hughes,
a GE Company.
www.dresserngs.com
Texsteam Pumps Multipoint IOM NGS.IPG.0065
11.20