Andrew ValuLine VHLP1-13-IT1B Petunjuk Instalasi
Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Antena Andrew ValuLine VHLP1-13-IT1B. Andrew ValuLine VHLP1-13-IT1B 2 halaman. Antennas siemens 0.3m 1ft & 0.6m 2ft
Installation Instructions
0.3m(1ft) & 0.6m(2ft)
ValuLine
Antennas Siemens IT1B
Description
The installation, maintenance, or removal of antenna
systems requires qualified, experienced personnel.
Andrew installation instructions have been written for
such personnel.
1
Note:-
Remove protective blanking plate
and hardware prior to fitting radio.
(Plate hardware to be retained if
radio is required to be remote
mounted)
1ft version of Antenna shown
Vertically Polarized Application
Notice
2
Change of Polarization method
Loosen screws (6 places) until
transition can rotate freely
then rotate transition hub 90 deg.
untill it "locates" in timing recess.
When located, re-tighten to a
torque of 5Nm (3.69 lb-ft)
Horizontally Polarized Application
Bulletin 102217
Timing mark on
transition with timing
mark on mounting ring
(Vertical Polirization)
Transition hub
Timing mark on
transition to line up
with timing mark on
mounting ring
(Horizontal
Polarization)