Electrolux CH 910 Panduan Pengguna - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi Electrolux CH 910. Electrolux CH 910 28 halaman. Stylish stainless steel chimney hood
Juga untuk Electrolux CH 910: Buku Instruksi (21 halaman)
Halaman Cetak
Clearance Height
The cooker hood is designed to be
fi tted over a cooking appliance at the
clearance heights stated, providing
the maximum output of the appliance
beneath does not exceed the maximums
quoted in the Technical Specifi cations.
If the output of the appliance below the
cooker hood exceeds the maximum
outputs quoted, please refer to the
cooker
manufacturer's
instructions.
A clearance height of 650mm (25 1/2 ")
is required when installed above a built-
in electric hob, or 700mm (27 1/2 ")
when installed above a built-in gas hob.
A clearance height of 685mm (27") is
required when installed above a slot-in
electric cooker, or 787mm
(30 1/2 ") when installed above a slot-in
gas cooker.
INSTALLING THE COOKER HOOD
installation
Hob
A: Built-in Electric Hob:
B: Built-in Gas hob:
C: Slot-in Electric Cooker:
D: Slot-in Gas Cooker:
When installed between adjoining wall
cabinets, the wall cabinets must not
overhang the hob and the distance
between the underside of the cabinet
and the worktop must be 450mm. If
the height of the wall cabinet is less
than 450mm, a gap of 50mm must be
maintained either side of the hob.
This cooker hood must not be instal-
led above a cooking appliance with a
high level grill.
The hood can be installed above these
heights but for optimum performance
it should be installed at the distances
quoted for the appropriate heat
source.
This appliance can be used in
either extraction mode (ducting) or
recycling mode (fi ltering).
The hood is supplied suitable for
recirculation with the charcoal fi lters
fi tted.
When used in the extraction mode
(ducting) the charcoal fi lters are not
required and must be removed and
destroyed.
650mm clearance
700mm clearance
685mm clearance
787mm clearance
electrolux 19
EN