Electrolux CHI 950 Buku Instruksi - Halaman 11

Jelajahi secara online atau unduh pdf Buku Instruksi untuk Kap Ventilasi Electrolux CHI 950. Electrolux CHI 950 21 halaman. Electrolux cooker hood instruction manual
Juga untuk Electrolux CHI 950: Buku Instruksi (21 halaman)

Halaman Cetak

It is dangerous to alter the speciﬁ cations or attempt to modify this product in any way.

Technical Information

DIMENSIONS

ELECTRICAL SUPPLY:

The symbol

on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be

handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of

correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city ofﬁ ce,

your household waste disposal service or the shop where you purchased the product.

DOUBLE INSULATED DO NOT EARTH

Electrical Requirements

Any permanent electrical installation must comply with

the latest I.E.E. Regulations and local Electricity Board

regulations. For your own safety this should be under-

taken by a qualiﬁ ed electrician e.g. your local Electricity

Board, or a contractor who is on the roll of the National

Inspection Council for Electrical Installation Contracting

(NICEIC).

Electrical Connection

Before connecting to the mains supply ensure that the

mains voltage corresponds to the voltage on the rating

plate inside the cooker hood.

INSTALLATION INSTRUCTIONS

HEIGHT OF CANOPY:

HEIGHT OF CHIMNEY:

WIDTH OF CANOPY :

DEPTH OF CANOPY:

VOLTAGE:

POWER CONSUMPTION:

FAN MOTOR:

LAMPS : (4 x 20 W)

Note: CE Marking certiﬁ es that this appliance complies with the requirements

laid down in EEC directive 89:336. (Electromagnetic compatibility) and subse-

quent modiﬁ cations and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

(UPPER SECTION) 415 mm

(LOWER SECTION) 740 mm

This appliance is ﬁ tted with a 2 core mains cable and

must be permanently connected to the electricity supply

via a double-pole switch having 3mm minimum contact

gap on each pole. A Switched Fuse Connection Unit to

BS1363 Part 4, ﬁ tted with a 3 Amp fuse, is a recom-

mended mains supply connection accessory to ensure

compliance with the Safety Requirements applicable to

ﬁ xed wiring instructions.

This appliance conforms to BS 800: 1988 and EEC

Directive No. 78 308 regarding suppression of ra dio and

television interference.

70 mm

898 mm

650 mm

220-240 V 50Hz

285 W

205 W

80 W