Electrolux DFKTWC75GS Panduan Penggunaan & Perawatan - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Penggunaan & Perawatan untuk Kap Ventilasi Electrolux DFKTWC75GS. Electrolux DFKTWC75GS 20 halaman. Electrolux vent hood use & care guide installation instructions
Halaman Cetak
DUCTED CONFIGURATION
1. Install the discharge collar into the duct connector
of the range hood. Fig. 6.
DISCHARGE
COLLAR
DUCT
CONNECTOR
NON- DUCTED CONFIGURATION
NOTE
The following materials must be purchased
separately for non-ducted recirculation
installations:
Non - Ducted Recirculation Kit, Model DFKTWC75GS.
5" diameter duct.
1. Discard discharge collar/damper supplied with the
hood. Install the 5" to 6" adapter supplied with the
Non-Ducted Recirculation Kit (Fig. 7).
2. Secure the plenum to the flue mounting bracket
with (2) 3.9x6mm flat head screws (the screws are
supplied with the Non-Ducted Recirculation Kit
FIG. 6
"DFKTWC75GS"). Fig. 8.
3.9x6mm
FLAT HEAD
SCREWS
PLENUM
Installation
5"-6"
ADAPTER
FIG. 7
FLUE MOUNTING
BRACKET
FIG. 8
11