Daikin VRVIII Series Manual Data Teknis - Halaman 11
Jelajahi secara online atau unduh pdf Manual Data Teknis untuk Pendingin Udara Daikin VRVIII Series. Daikin VRVIII Series 20 halaman. Air conditioning systems bs box
Juga untuk Daikin VRVIII Series: Manual Data Teknis (20 halaman), Manual Data Teknis (18 halaman), Manual Data Teknis (11 halaman)
Halaman Cetak
6
Dimensional drawing & centre of gravity
6 - 1 Dimensional drawing
FXMQ40P
20-ø 4.7 hole
(All around)
Air Outlet
Inspection hatch 450 or more
Air outlet
Ceiling
FXMQ50,63,80P
30-ø 4.7 hole
(Suspention bolt position)
(All around)
Air Outlet
(service space)
Inspection hatch 450 or more
Air outlet
Ceiling
140
• Indoor Units • CONCEALED CEILING UNIT • FXMQ-PVE
1
2
3
(Suspention bolt position)
Air Inlet
26-ø 4.7 hole
(All around)
700 or more
(service space)
Air Inlet
(Note 2)
14 - 8x12 oblong hole
Floor surface
36-ø 4.7 hole
(All around)
Air Inlet
700 or more
300 or less
Air Inlet
(Note 2)
Floor surface
®
• VRV
Systems • Indoor Units
NOTES
Location of MANUFACTURE'S LABEL: Control box
surface
Mount the air filter at the suction side.
(Select its colorimethod (gravity method) 50% or more)
Do not locate things should not be wet under the indoor
unit.
Dews may droop when humidity reaches over 80%, or a
drain gets stuck, or air filters are not clean.
12 - 8x12 oblong hole
(All around)
Inspection hatch
View
(From the Air Outlet)
300 or less
(All around)
(From the air inlet)
NOTES
1
Location of MANUFACTURE'S LABEL: Control box
surface
2
Mount the air filter at the suction side.
(Select its colorimethod (gravity method) 50% or
more)
3
Do not locate things should not be wet under the
indoor unit.
Dews may droop when humidity reaches over 80%,
or a drain gets stuck, or air filters are not clean.
16 - 8x12 oblong hole
(All around)
Inspection hatch
View
(From the Air Outlet)
18 - 8x12 oblong hole
(All around)
(From the air inlet)
4
Space for Service Works
According to any one of below 1) - 3), secure a space for service works, such
as, checking and maintenance of control box and drain pumps, etc.
1) One inspection hatch (450x450) on the control box side and a space of 300mm or
more under the unit. (Fig.A)
2) One inspection hatch (450x450) on the control box side and 2 (two) inspection
hatches under the unit (Arrow view B-1)
3) 3 (three) inspection hatches under the unit and the control box. (Arrow view B-2)
<Inspection hatch>
(Ceiling opening)
Control box
Control box
Ceiling
Ceiling
Inspection hatch
Inspection hatch (°450)
Inspection hatch (450mmx450mm)
Control box
Control box
Inspection hatch 3
Control box
Air
Air
inlet
outlet
Fig. A
or more
Inspection hatch 2
View B-1
View B-2
12 Drain hose (accessory)
11 Socket (for maintenance)
10 Hook
9 Air suction flange
8 Air discharge flange
7 Power supply connection
6 Interunit wiring connection
5 Control box (inside)
4 Ground terminal (in control box)
3 Drain pipe connection
2 Gas pipe connection
1 Liquid pipe connection
ITEM PART NAME
4
Space for Service Works
According to any one of below 1) - 3), secure a space for service works, such
as, checking and maintenance of control box and drain pumps, etc.
1) One inspection hatch (450x450) on the control box side and a space of
300mm or more under the unit. (Fig.A)
2) One inspection hatch (450x450) on the control box side and 2 (two)
inspection hatches under the unit (Arrow view B-1)
3) 3 (three) inspection hatches under the unit and the control box. (Arrow view B-2)
<Inspection hatch>
(Ceiling opening)
Control box
Control box
Ceiling
Ceiling
Inspection hatch
Inspection hatch (°450)
Inspection hatch (450mmx450mm)
Control box
Control box
Inspection hatch 3
Control box
Air
Air
outlet
inlet
Fig. A
or more
Inspection hatch 2
View B-1
View B-2
12 Drain hose (accessory)
11 Socket (for maintenance)
10 Hook
9 Air suction flange
8 Air discharge flange
7 Power supply connection
6 Interunit wiring connection
5 Control box (inside)
4 Ground terminal (in control box)
3 Drain pipe connection
2 Gas pipe connection
1 Liquid pipe connection
ITEM PART NAME
O.D. ø 32 (outlet)
VP25 (O.D. ø 32 /I.D. ø 25)
For M10
M4
VP25 (O.D. ø 32 /I.D. ø 25)
ø 12.7 flale connection
ø 6.4 flale connection
REMARK
3D060160
O.D. ø 32 (outlet)
VP25 (O.D. ø 32 /I.D. ø 25)
For M10
M4
VP25 (O.D. ø 32 /I.D. ø 25)
ø 15.9 flale connection
ø 9.5 flale connection
REMARK
3D060161