Electrolux EFA90245X Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi Electrolux EFA90245X. Electrolux EFA90245X 21 halaman. Electrolux cooker hood
Juga untuk Electrolux EFA90245X: Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman)

Halaman Cetak

Ducting Connection

Connect the ducting chosen to:

The diameter of the ducting spigot on the top of

the hood body item 1 is Ø150mm (6").

When using Ø120mm ducting it will be necessary

to install the ducting adapter item 9 to the the

Dumper 10 (supplied) Ø150mm outlet on the top

of the hood body.

If the room where the cooker hood is to be used

contains a fuel burning appliance such as a central

heating boiler, then its flue must be of the room

sealed or balanced flue type.

If other types of flue or appliances are fitted sure

that there is an adequate supply of air to the

room.

The cooker ducting (extraction mode) must never

be connected to central heating flues, radiators or

water heaters etc.

Recirculation

The cooker hood is supplied specified for use in the

recirculation mode, with the charcoal filter fitted.

In the recirculation mode contaminated air is passed

through the charcoal filter to be purified and recirculated

into the kitchen through the grille outlets on either side

of the chimney.

Recirculation Connection

• Insert the Connector extensions 14.1 into the side of

the Connector 15.

• Insert the Connector 15 into the Support bracket 7.3

and fix it with the screws.

• Fasten the Support bracket 7.3, fixing it to the upper

part with the Screws.

• Make sure that the Connector extensions outlet 14.1

is in correspondence with the Chimney openings both

horizontally and vertically.

• Join the Connector 15 to the Hood canopy outlet using

a rigid or flexible pipe ø¸150 mm, selection of which

is at the discretion of the installation techni-cian.

• Make sure that the Activated charcoal odour filter

has been fitted.

INSTALLING THE COOKER HOOD

��

�

��