Electrolux EFA9620 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi Electrolux EFA9620. Electrolux EFA9620 18 halaman.

10 electrolux

Fixing the frame

• Loosen the two screws fastening the

lower chimney and remove this from

the lower frame.

• Loosen the two screws fastening the

upper chimney and remove this from

the upper frame.

If you wish to adjust the height of the

frame, proceed as follows:

• Unfasten the eight metric screws join-

ing the two columns, located at the

sides of the frame.

• Adjust the frame to the height re-

quired, then replace all the screws

removed as above.

• Insert the upper chimney stack from

above, and leave it running free on the

frame.

• Lift up the frame, ﬁ t the frame slots

onto the screws up to the slot end

positions.

• Tighten the two screws and fasten

the other two screws provided with

the hood.

Before tightening the screws completely

it is possible to adjust the frame by tur-

ning it. Make sure that the screws do

not come out of their seats in the slotted

holes.

• The frame mountings must be secure

to withstand the weight of the hood

and any stresses caused by the oc-

casional side thrust applied to the

device.

On completion, check that the base is

stable, even if the frame is subjected

to bending.

• In all cases where the ceiling is not

strong enough at the suspension

point, the installer must provide

strengthening using suitable plates

and backing pieces anchored to the

structurally sound parts.

Installation