AirTech AT-100 B Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio AirTech AT-100 B. AirTech AT-100 B 8 halaman. Land mobile radio

Halaman Cetak

Unpacking

Unpack and check that all items have been enclosed.

Packing contents:

radio antenna battery pack (1,350

mAH)

belt clip

hand strap

charger

Optional Accessories

1. External earphone & MIC. (APE–10)

2. Additional battery pack (720 mAH, HM–720)

user's manual

AIRTECH INFORMATION & COMMUNICATION CO., LTD.

FCC ID: ONKAT-100B

JOB #: 606BK0

EXHIBIT #: 6C

Getting Ready

Installation, Removal Belt Clip

Installation: align the belt clip with

the plastic slots of the battery pack.

Slide the belt clip onto the battery

pack, pushing firmly until a click

heard.

Removal: hold up the belt clip

release tab with a fingernail or a

coin (or like instrument). While

holding up the release tab, slide the belt clip out and

away from the battery pack.

Installation, Removal Battery Pack

Installation: turn off the transceiver. Hold the transceiver

with the back of the unit facing up.

Place the battery pack against the

back of the transceiver so that the

tabs on the transceiver engage the

four openings in the battery pack.

Slide the battery pack toward the

top of the transceiver until a click

heard.

Removal: turn off the transceiver.

Hold the radio with the back of the unit facing up. With

the thumbnail of your other hand slide the latch lever

down. While holding the latch lever down, slide the

battery pack down toward the bottom of the transceiver.

Separate the battery pack from the transceiver.

Installation Antenna

Rotate the antenna clockwise until

it is seated firmly.

*. Before your starting operation, make

sure the battery is fully charged.