Bosch 40815356 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Bosch 40815356. Bosch 40815356 44 halaman.

Installation and connection

Before using your appliance for the first time

Remove leaflets, adhesive tape and protective film.

Clean the appliance.

~ "Cleaning" on page 11

Caution!

Do not connect the appliance to electronic energy saver

plugs.

Note:

You can connect the appliance to mains-controlled

and sine-controlled inverters.

Mains-controlled inverters are used for photovoltaic

systems which are connected directly to the national grid.

Sine-controlled inverters must be used for isolated

applications. Isolated applications, e.g. on ships or in

mountain lodges, which are not connected directly to the

national grid.

After installing the appliance, wait at least 1 hour

before connecting it to prevent damaging the

compressor.

Connect the appliance via a correctly installed socket.

The socket must comply with the following data:

Socket with

220V ... 240 V

Conductor

50 Hz ... 60Hz

Fuse

10A ... 16 A

Outside Europe: Check whether the indicated current

type of the appliance corresponds with the values of

your power supply. Appliance specifications are on the

rating plate.

~ "Getting to know your appliance" on page 7

Connect the appliance to a socket near the appliance.

The socket must be freely accessible even after the

appliance has been installed.