Electrolux EFC 6426 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi Electrolux EFC 6426. Electrolux EFC 6426 12 halaman. Electrolux cooker hood
Juga untuk Electrolux EFC 6426: Panduan Pengguna (12 halaman), Panduan Pengguna (12 halaman)

Halaman Cetak

Remove the support from the telescopic flue

by unscrewing the two screws that fix it to the

flue (one per side - save the screws - Fig. 10).

Remove deflector F from the support by

unscrewing the 4 screws that fix it to the

support (save the screws - Fig.10).

Fix the telescopic flue support to the ceiling.

The support has a reference mark that must

correspond to the line previously traced on the

wall (Fig. 10).

Mark where the holes for fixing the support

should be made with a pencil, and drill (Ø 8

mm).

Insert two dowels and fix the telescopic

support with two 5x45 screws (Fig. 10).

Fix the end of the waste disposal tube onto

connection ring B and the other end to the

conduit for evacuating fumes (aspiration

version) or the connection ring of ventilator

screen F (recirculation version).

Attention! Concerns only the EFCR 942

model:

Connect the waste disposal tube to one

external aspiration unit (see following

paragraph Connection to an external motor).

Connect the electricity.

Attention! Only for the EFCR 942 model:

It is also necessary to carry out the electrical

connection to an external aspiration unit (see

following paragraph Connection to an external

motor).

Check, in the case of a non-return valve being

used, that it is functioning correctly and is not

blocked by the tube.

Fix the upper part of the hood to its support

with two screws (Fig. 10).

Slide the lower section of the flue downwards

and insert it into the apposite housing on the

upper part of the hood.

Position the filter at the back of the hood and

move the handle upwards until the filter is

blocked.

All manuals and user guides at all-guides.com

3,5 x 13

Fig. 10

2,9 x 6,5