Bosch 6 Series Petunjuk Instalasi Dan Petunjuk Penggunaan - Halaman 6

Installing the spacers

Remove two screws with screwdriver first, and take out

the spacers from plastic bag and fix it to the back of

the appliance through the screws then. This ensures

that there is a minimum distance between the appli

ance and the wall.

Installation dimensions and door opening

angle

130°

908 mm

418 mm

Before you use the product, please check the handles

of the appliance. If a handle is loose, you should fix it

with the hexangular screwdriver in the clockwise

direction, then it can be used normally.

135°

277 mm

628 mm

1171 mm

To ensure that the appliance functions correctly, it must

be set level with a spirit level.

For sufficient leveling and air circulating in the lower

rear section of the appliance, the bottom feet may

need to be adjusted.

To allow the doors to selfclose, tilt back the top

backwards at about 15 mm or 0.5° by turning the

adjustable feet.

Whenever you want to move the appliance,

remember to turn the feet back up, so that the

appliance can roll freely.

The rollers, which are not castors, should be only

used for forward or backward movement. Moving

the refrigerator sideways may damage your floor

and the rollers.

Reinstall the appliance when relocating.

15 mm

0.5°

adjustable bottom feet