Bosch B24 50 Series Panduan Penggunaan dan Perawatan - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Kulkas Bosch B24 50 Series. Bosch B24 50 Series 40 halaman.

Halaman Cetak
en-us Preventing material damage
2 Preventing material damage

Preventing material damage

Preventing material damage
NOTICE:
If not rolling in a straight line, the appliance's castors may
damage the floor when the appliance is moved.
Transport the appliance using a hand-cart.
▶
Use floor protection when moving the appliance, and do
▶
not move it in a zigzag fashion.
Using the base, runners or appliance doors as a seat or
climbing surface may damage the appliance.
Do not stand or lean on the base, runners or doors.
▶
Contamination with oil or fat may cause plastic parts and
door seals to become porous.
Keep plastic parts and door seals free of oil and grease.
▶
Metal or metal-style parts in the appliance may contain
aluminum. Aluminum reacts when it comes into contact
with acidic foods.
Do not store unpackaged food in the appliance.
▶
3 Environmental protection and en-

Environmental protection and energy-saving

ergy-saving
Environmental protection and energy-saving
3.1 Disposal of packaging
The packaging materials are environmentally compatible
and can be recycled.
Sort the individual components by type and dispose of
▶
them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Selecting the installation location
¡ Keep the appliance out of direct sunlight.
¡ Install the appliance as far away as possible from heat-
ing elements, stoves and other heat sources:
– Maintain a 1
1
/
" (30 mm) clearance to electric or gas
4
stoves.
– Maintain an 11
13
/
" (300 mm) clearance to oil or
16
solid-fuel stoves.
¡ Make sure there is a small gap between the side wall
and the appliance.
¡ Never cover or block the external ventilation openings.
Saving energy during use
Note: The arrangement of the fittings does not affect the
energy consumption of the appliance.
¡ Open the appliance only briefly and then close it care-
fully.
¡ Never cover or block the interior ventilation openings or
the exterior ventilation openings.
¡ Transport purchased food in a cooler and place quickly
in the appliance.
¡ Allow warm food and drinks to cool down before storing
them.
¡ Thaw frozen food in the refrigerator compartment to uti-
lize the low temperature of the food.
1
Depending on the appliance specifications
2
Not in all countries
6
¡ Always leave some space between the food and to the
back panel.
4 Installation and connection

Installation and connection

Installation and connection
4.1 Included in delivery
After unpacking all the parts, check for any damage in
transit and for completeness of delivery.
If you have any complaints, contact your dealer or our
Customer Service →  Page 18 .
The delivery consists of the following:
¡ Free-standing appliance
¡ Equipment and accessories
¡ Installation instructions
¡ User manual
¡ Explanation of the limited product warranty
2
¡ Warranty enclosure
¡ Energy label
¡ Information on energy consumption and noises
¡ Information about Home Connect®
4.2 Criteria for the installation location
WARNING
If the appliance is in a space that is too small, a leak in the
refrigeration circuit may result in a flammable mixture of
gas and air.
Only install the appliance in a space with a volume of at
▶
least 35 ft
3
(1 m
3
) per 0.3 oz (8 g) refrigerant. The
amount of refrigerant is indicated on the rating label.
→ "Appliance", Fig.
/
1
The weight of the appliance from factory may be up to
265 lbs (120 kg) depending on the model.
The subfloor must be sufficiently stable to bear the weight
of the appliance.
Over-and-under and side-by-side installation
If you want to install 2 refrigerating appliances one over
the other or side by side, you must maintain a clearance of
at least 150 mm between the appliances. Selected appli-
ances can be installed without a minimum clearance. Ask
your dealer or kitchen planner about this.
4.3 Installing the appliance
Install the appliance in accordance with the enclosed in-
▶
stallation instructions.
4.4 Preparing the appliance for first use
Remove the information material.
1.
Remove the protective film and transit bolts, e.g. re-
2.
move the adhesive strips and cardboard.
Clean the appliance for the first time. →  Page 13
3.
1
, Page 8
5