Atlantic TA1800 Panduan Produk - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Produk untuk Pompa Air Atlantic TA1800. Atlantic TA1800 17 halaman.
Warranty Claims
In case of warranty claims, the air pump should be returned to place of purchase
accompanied by original receipt.
Troubleshooting Guide
Always turn off power before inspecting the pump. Failure to observe this precaution can
result in a serious accident.
Before ordering repairs, carefully read through this instruction booklet. If the problem persists,
contact your dealer.
Problem
Air pump does
not run
Air pump stops
after starting
Diminished
air flow rate or
no air flow
Possible Cause
Power is off
Power failure
Voltage drop/ Overload
Power cord is not connected
Air pump is
overheating
Power/Current overload
Kinked/damaged tubing
Dirty filter media
Worn/damaged diaphragm
Air line is submerged
below operating depth
Possible Solution
Turn power on
Check power supply or
contact local power company
Check/Replace the GFI (Ground
Fault Interrupter)
Connect power cord
Allow pump to cool
Check length/size of power cable.
Check or replace GFI
Repair/replace tubing
Clean filter media
Consult your dealer. Replace
diaphragm and flappers
Raise air line to desired depth
5