Electrolux ERC926BA Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi Electrolux ERC926BA. Electrolux ERC926BA 16 halaman. Cooker hood
Halaman Cetak
10
USING THE COOKER HOOD
Standby mode
When connecting the cooker hood to the power supply for
the first time or after power is returned after power outage,
all symbols on the control panel will light up from left to
right and a "beep" will sound once. Following this, the
control panel goes to standby mode and the cooker hood
will be ready for use.
Turning on hood
When the cooker hood is in standby mode, user can
either press the
or
button to turn on the fan or light
individually. The default factory level is 2, following that, the
cooker hood remembers the last used setting and will start
at that level when the user presses the fan or light button.
Pressing directly on the slider strip will also allow the user
to jump straight into the level pressed.
Fan – select speed to suit cooking conditions
– motor on/off
1
– light frying/boiling
2
– frying/wok cooking/heavy boiling
3
– grilling, intensive frying and wok cooking
– stir frying
NOTE: Touch the symbol to turn the fan boost ON, the
fan boost starts running at the highest fan speed for 1
minute before reducing to speed 3 automatically.
Light – select light level
– Light on/off
1
– low-light level
2
– mid-light level
3
– high-light level
Using the Timer
At the end of cooking, if the timer is switched on, the
cooker hood will continue to run for an additional 5
minutes, depending on the selected fan speed. This
should ensure the removal of any odours that remain
after cooking.
Fan
Light
Filter
This is the indicator/switch
to be cleaned. Once the filters are cleaned the "Filter" alert
can be deactivated with a single touch.
Control Lock
Press and hold 3 seconds the
control panel at any time. The same action will unlock the
control panel.
When control is locked, pressing any other button will
make
. button blink and a beep will sound.
• W hen the cooker hood is working (light on and fan on)
and
is touched then the cooker hood will stop fan
but keep lighting on while lock menu.
• W hen the cooker hood is working (lights off and fan
on) and the
is touched then the cooker hood will
stop fan and keep lighting off while lock menu.
• W hen
is activated when the cooker hood is working
it will just change the status of fan motor and not
change the status of lighting.
• W hen
is touched while the cooker hood stops then
it will just lock the menu
S
to show when the filter needs
. button will lock the