Electrolux Icon E36DD75ESS Panduan Petunjuk Instalasi - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kap Ventilasi Electrolux Icon E36DD75ESS. Electrolux Icon E36DD75ESS 33 halaman. External blower assembly for electrolux retractable ventilation systems
Juga untuk Electrolux Icon E36DD75ESS: Panduan Petunjuk Instalasi (14 halaman), Lembar Spesifikasi (1 halaman), Panduan Penggunaan & Perawatan (12 halaman), Katalog Suku Cadang Pabrik (6 halaman), Panduan Penggunaan & Perawatan (12 halaman), Spesifikasi & Dimensi (2 halaman), Panduan Petunjuk Instalasi (14 halaman)

Making the Electrical Connection

ELECTRICAL CONNECTION

WARNING

Ensure that the power supply is disconnected before proceeding.

Verify that the power supply matches the ratings found on the appliance data

plate before proceeding.

The complete appliance must be properly grounded at all times when electrical

power is applied.

Do not ground the appliance with the neutral (white) house supply wire. A

separate ground wire must be utilized.

If aluminum house supply wiring is used, splice the appliance copper wires to

the aluminum house wiring with special connectors designed and agency-

certified for this purpose. Follow the connector manufacturer's recommended

procedure carefully. Improper connection can result in a fire hazard.

Failure to complete electrical connections properly may result in a damaged or

non-functional system. Follow the wiring diagrams carefully to ensure a proper

installation.

It is the owner's responsibility to ensure that a qualified electrician performs the

electrical connection of this appliance. The electrical installation, including

minimum supply wire size, must comply with the latest revision of the National

Electric Code ANSI/NFPA 70* and local codes and ordinances.

A copy of this standard may be obtained from:

National Fire Protection Association

1 Batterymarch Park

Quincy, Massachusetts 02269-9101

NOTE

Make all electrical connections between the vent and blowers, then connect

power to the vent as per the wiring diagram shown.

Use wire nuts and electrical tape to secure all wiring connections at the blowers.