Electrolux ICON RH36WC60GS Panduan Pemasangan, Penggunaan & Perawatan - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pemasangan, Penggunaan & Perawatan untuk Kap Ventilasi Electrolux ICON RH36WC60GS. Electrolux ICON RH36WC60GS 21 halaman. 30” et 36” hotte aspirante
Juga untuk Electrolux ICON RH36WC60GS: Spesifikasi (2 halaman), Katalog Suku Cadang Pabrik (4 halaman), Panduan Pemasangan, Penggunaan & Perawatan (22 halaman), Panduan Pemasangan, Penggunaan & Perawatan (22 halaman), Panduan Penggunaan & Perawatan (44 halaman), (Bahasa Inggris) Panduan Pemasangan, Penggunaan, dan Perawatan (22 halaman), (Bahasa Prancis) Panduan Pemasangan, Penggunaan, dan Pemasangan (22 halaman)

Installing the hood

Mounting the duct cover

• Position the duct cover over the mounted hood.

• Slide the bottom of the duct onto the glass area.

• Position the top of the duct over the duct

mounting bracket. If a telescopic duct cover is

used, grab the upper part of the telescopic duct

cover, pull it and place it in the duct cover

mounting bracket.

• Secure the top of the duct with 2 assembly

screws provided.

• Secure the bottom of the duct with 2 assembly

screws provided.

Install the grease filter and turn power on at service

panel. Check operation of the hood.

IMPORTANT: If the hood doesn't switch ON, before

calling for service, check if the internal General ON/

OFF Pushb-utton Switch is switched ON.

Frontside of the hood

Back side of the hood

General ON/OFF

Push button Switch