Electrolux ICON RH36WC60GS Panduan Pemasangan, Penggunaan & Perawatan - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemasangan, Penggunaan & Perawatan untuk Kap Ventilasi Electrolux ICON RH36WC60GS. Electrolux ICON RH36WC60GS 22 halaman. 30” et 36” hotte aspirante
Juga untuk Electrolux ICON RH36WC60GS: Spesifikasi (2 halaman), Katalog Suku Cadang Pabrik (4 halaman), Panduan Pemasangan, Penggunaan & Perawatan (21 halaman), Panduan Pemasangan, Penggunaan & Perawatan (22 halaman), Panduan Penggunaan & Perawatan (44 halaman), (Bahasa Inggris) Panduan Pemasangan, Penggunaan, dan Perawatan (22 halaman), (Bahasa Prancis) Panduan Pemasangan, Penggunaan, dan Pemasangan (22 halaman)

Installing the hood

Install framing for hood support

If drywall is present, mark the screw hole

locations. Remove the template.

Cut away enough drywall to expose 2 vertical

studs at the holes location indicated by the

template.

Install two horizontal supports at least ùé X 2é

between two wall studs at the bottom and upper

mounting holes installation location.

room side of the studs.

Use cleats behind both sides of the support to

secure to wall studs.

IMPOR

T T

ANT - - - - - Framing must be capable of

ANT

IMPOR

IMPORT T

TANT

ANT

supporting êûû lbs.

Framing must be capable of

WARNING: 2 people are required to lift and position

the hood onto the mounting screws.

Place the template on the wall along the horizon-

tal line, make sure the template is leveled and

centered with the centerline.

Mark "upper" screw holes locations in the wall.

IMPORTANT. Check to be sure that hole locations

are leveled and correctly centered by the vertical

centerline.

Drive "upper" wood screws by hand. Leave ¼ " of

distance between the screw head and the wall.

onto the "upper" screws.

Mark "lower" wood screw holes locations in the

wall using a pencil.