Electrolux RH30WC55GS Panduan Pemasangan, Penggunaan & Perawatan - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemasangan, Penggunaan & Perawatan untuk Kap Ventilasi Electrolux RH30WC55GS. Electrolux RH30WC55GS 21 halaman. 30” et 36” hotte aspirante
Juga untuk Electrolux RH30WC55GS: Katalog Suku Cadang Pabrik (4 halaman), Brosur & Spesifikasi (2 halaman), Panduan Pemasangan, Penggunaan & Perawatan (20 halaman), Panduan Pemasangan, Penggunaan & Perawatan (20 halaman), Panduan Pemasangan, Penggunaan & Perawatan (20 halaman), (Bahasa Inggris) Panduan Pemasangan, Penggunaan, dan Perawatan (25 halaman), (Bahasa Prancis) Panduan Pemasangan, Penggunaan, dan Pemasangan (21 halaman)

Halaman Cetak
Electrolux RH30WC55GS Panduan Pemasangan, Penggunaan & Perawatan
Remove the hood.
Drive "lower" wood screws, by hand. Remove
screws.
Mount the hood onto the "upper" screws.
Drive and tighten the "upper" wood screws, by
hand.
Drive and tighten the "lower" wood screws, by
hand.

Connecting the ductwork

Connecting the ductwork
Connecting the ductwork
Connecting the ductwork
Connecting the ductwork
Install ductwork, making connections in the
direction of air ow as illustrated.
Push duct over the exhaust outlet.
Wrap all duct joints and the ange connections
with duct tape for an airtight seal.
Make the same connection in the wall or ceiling
vent exit.
Installing the hood
Air de ector installation
Air de ector installation
Air de ector installation
Air de ector installation
Air de ector installation
(Recirculating accessories)
(Recir
(Recir
(Recir
(Recir
culating accessories)
culating accessories)
culating accessories)
culating accessories)
Assemble the air de ector with the duct cover
bracket with 4 assembly screws provided as
shown.
Measure from the bottom of the air de ector to
the bottom of the hood outlet, as shown.
Cut the duct at the measured size.
Uninstall the air de ector removing the 4
assembly screws.
Slip the duct onto the bottom of the de ector.
Place the assembled de ector and duct over the
exhaust outlet from the hood.
Assemble the air de ector to the duct cover
bracket with 4 assembly screws provided as
shown.
11 11
11 11
11