Electrolux RH30WC55GS Panduan Pemasangan, Penggunaan & Perawatan - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pemasangan, Penggunaan & Perawatan untuk Kap Ventilasi Electrolux RH30WC55GS. Electrolux RH30WC55GS 20 halaman. 30” et 36” hotte aspirante
Juga untuk Electrolux RH30WC55GS: Katalog Suku Cadang Pabrik (4 halaman), Brosur & Spesifikasi (2 halaman), Panduan Pemasangan, Penggunaan & Perawatan (20 halaman), Panduan Pemasangan, Penggunaan & Perawatan (21 halaman), Panduan Pemasangan, Penggunaan & Perawatan (20 halaman), (Bahasa Inggris) Panduan Pemasangan, Penggunaan, dan Perawatan (25 halaman), (Bahasa Prancis) Panduan Pemasangan, Penggunaan, dan Pemasangan (21 halaman)

For Best results

For Best r

esults

• Continuous use of the fan system while cooking helps keep the kitchen comfortable and less humid.

• It also reduces cooking odors and soiling moisture that create a frequent need for cleaning.

• Turn the blower on before starting to cook.

• Use a rear burner when browning or pan frying meat.

• Open a window or inside door slightly.

• Clean the filters and the wall behind the filters frequently.

• The blower should be turned on for a few minutes befor

through the hood. Thus when heat, smoke, moisture, grease and cooking odors are produced, they will

be carried outside instead of drifting into other rooms.

• Use the low speeds for normal use and the higher speeds for strong odors or fumes.

• Drafts across the range or cooktop will cause the escape of heat, smoke, moisture, grease and cooking

odors from the hood. Such drafts should be prevented in so far as possible.

• The best job of ventilation in the kitchen is done where the only air currents are those created by the

blower itself.

• For Gas Cooktops,

For Gas Cooktops,

For Gas Cooktops, a lower blower speed should be used if:

For Gas Cooktops,

• the gas flame is being distorted by the air movement.

• the burner continually sparks (clicks)

• the burner flame repeatedly blows out.

befor

before e e e e cooking in order to establish air currents upward

befor