Atlantic Ultraviolet Zenith Panduan Pengoperasian & Pemeliharaan - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian & Pemeliharaan untuk Sensor Keamanan Atlantic Ultraviolet Zenith. Atlantic Ultraviolet Zenith 8 halaman. Uv-c detector

Halaman Cetak

SAFETY WARNINGS

•
All personnel should be alerted to the potential hazards indicated by the product safety labeling on this unit.
•
The following conventions are used to indicate and classify precautions in this manual and on product safety labeling. Failure to
observe precautions could result in injury to people or damage to property.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Danger indicates an IMMINENTLY
hazardous situation, which, if not avoided,
WILL result in death or
serious injury.
Caution indicates a POTENTIALLY
hazardous situation, which, if not avoided,
MAY result in minor or moderate injury.
This symbol/pictorial is used to identify
an ELECTRICAL SHOCK or
ELECTROCUTION hazard.
This symbol/pictorial is used to identify the need
to wear approved ultraviolet blocking eyewear.
This symbol/pictorial is used to identify the need
to wear protective gloves.

SAFETY INSTRUCTIONS

To guard against injury, basic safety precautions should be observed, including the following:
Read and follow ALL safety instructions.
1.
germicidal ultraviolet rays. Germicidal ultraviolet rays are harmful to the eyes and skin. Wear face, hand, and eye
protection and cover any skin that may be exposed to direct or reflected germicidal ultraviolet rays.
2. Intended for indoor use only.
3. Do not alter design or construction.
4. Do not use this device for other than its intended purpose, as described in this manual.
5.
When using this device to check a UV-C source, be aware that the germicidal ultraviolet rays
produced by the lamp may break down plastic, rubber, or other non-metallic materials with inadequate resistance
to ultraviolet.
6.
Do not remove any labels.
7.
Read and follow all notices and warnings on the device.
8.
Do not subject the device to extreme temperatures, humidity, shock, dust, or water.
9.
Keep the UV-C photodiode detector clean, free of dirt, oil etc. and avoid scratching or damaging the detectors face.
10. SAVE THESE INSTRUCTIONS.
SAFETY LABELS
Caution Label: Wear Eye Protection
When Checking UV Light Sources
When using this device to check a UV-C source, avoid exposure to direct or reflected

CAUTION

It is the user's responsibility to determine and validate the suitability
of this equipment for use in the user's system or process.
No warranty or representation is made by the manufacturer with
respect to suitability or performance of this equipment or to the results
that may be expected from its use.
The user should periodically inspect, clean as necessary and confirm
the presence and good legibility of the product safety labels. Contact
the factory for replacement labels in the event that any of the labels
Location of Caution Label
are missing or illegible.
Warning indicates a POTENTIALLY
hazardous situation, which, if not avoided,
COULD result in death or serious injury.
Caution used without the safety alert
symbol indicates a potentially hazardous
situation, which, if not avoided, may result
in property damage.
This symbol/pictorial is used to identify an ULTRAVIOLET
LIGHT hazard.
This symbol/pictorial is used to identify the need to wear
approved ultraviolet blocking face shield.
This symbol/pictorial is used to identify components which
must not be disposed of in trash
3