Bosch 6 Series Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 12

Halaman Cetak

Bosch 6 Series Panduan Petunjuk Pemasangan dan Pengoperasian

Installation and connection

Installation and

connection

Scope of delivery

I n s t a l l a t i o n a n d c o n n e c t i o n

Dryer

■

Installation and operating

■

instructions

Basket for woollens

■

Condensation drain*

■

Installing and connecting the

dryer

Warning

Risk of death!

There is a risk of electric shock as the

dryer is operated with electricity.

Check the dryer for visible damage.

■

You must not operate the dryer if it is

damaged.

Before connecting the dryer to the

■

power supply, ensure that the

electric voltage specified on the

rating plate matches the voltage of

your socket.

Only use residual current circuit

■

breakers with the following symbol:

Ensure that the mains cable is not

■

kinked or trapped and that it does

not come into contact with heat

sources or sharp edges.

Warning

Children could lock themselves in the

dryer, putting their lives at risk!

Do not set up the dryer behind a door

or sliding door as this may obstruct the

dryer door or prevent it from opening.

Caution!

Risk of injury

As the dryer is heavy, you could

■

injure yourself by trying to lift it.

Do not lift the dryer on your own.

Depending on the model

You could cut your hands on the

■

sharp edges of the dryer. Do not

hold the dryer by the sharp edges.

Protruding parts on the dryer may

■

break off when it is lifted or pushed.

Do not move the dryer by holding on

to protruding parts.

Caution!

Risk of material damage to the dryer or

fabrics

Check the dryer for damage caused

■

during transportation. Never operate

a dryer if it is damaged.

Any residual water in the dryer may

■

freeze and damage the dryer. Do not

install the dryer in rooms that are at

risk of frost.

During installation ensure that:

The dryer is placed on a clean, level

■

and firm surface,

The mains plug can be accessed at

■

all times,

The air inlet on the dryer is kept clear

■

and there is sufficient ventilation,

The area around the dryer is kept

■

clean and

The dryer is levelled using the

■

threaded feet.

Check the alignment of the

Note:

appliance with a spirit level and

correct if necessary. Change the

height by turning the appliance feet.

All appliance feet must stand firmly

on the ground.

Incorrect alignment may cause high

noise levels, vibrations and improper

movement of the drum.

If in doubt, have the appliance

Note:

connected by a specialist.