Drija BARI 30 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Drija BARI 30. Drija BARI 30 12 halaman. Built-in electric stove
Juga untuk Drija BARI 30: Panduan Pengguna (14 halaman)

Halaman Cetak

HINTS AND TIPS

Problem

The electric hob cannot be turned

on.

The surface is being scratched.

The above are the judgment and inspection of common failures.

Please do not disassemble the unit by yourself to avoid any dangers and damages to

the hob.

5. INSTALLATION

PREPARING THE WORKTOP

Cut out the work surface following the dimensions shown in the drawing below.

For the purpose of installation and use, a minimum distance of 10cm space must be left

around the cut out. Ensure the thickness of the work surface is at least 20mm. Use a heat

resistant work surface material to avoid deformation caused by heat from the hob. Minimum

distance between hob and cupboard should be at least 76cm.

User Manual

ELECTRIC STOVE BUILT-IN | BARI 30

Possible Causes

No power.

Rough-edged cookware.

Unsuitable

abrasive

scourer

cleaning products being used.

What To Do

Make sure the electric hob is

connected tithe power supply and

that it is switched on.

Check whether there is power

outage in your home or area.

If you've checked everything and

the problem persists, call a qualified

technician.

Use cookware with flat and smooth

bases. See 'Choosing the Right

Cookware',

See

Cleaning'.

'Care

and