Electrolux CycloneXL Panduan Petunjuk Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penyedot Debu Electrolux CycloneXL. Electrolux CycloneXL 7 halaman. Electrolux vacuum cleaner
Juga untuk Electrolux CycloneXL: Panduan Petunjuk Pengoperasian (7 halaman), Panduan Pengoperasian (11 halaman)
Halaman Cetak
Cleaning the motor filter and the dust container filter
CycloneXL has a motor filter and a dust container filter that should be cleaned now and then.
Open the front lid and lift out the dust container.
Dust container filter: Remove the filter holder from the dust container and carefully pull the dirty dust contai-
ner filter out of the holder.
Motor filter: Pull the filter upwards until coming away from the groove.
6
Rinse the filters in lukewarm water and let them dry. Reattach the clean filters. Replace the dust container
and then close the lid.
33
Cleaning/replacing the exhaust filter*
There are three types of exhaust filter:
• Micro filter* (Ref. No. EF 17)
• Hepa H1* non washable (Ref. No. EF H1)
• Hepa H1* washable (can be bought as an option, Ref. No. EF H1W)
The filters must always be replaced with new ones and cannot be washed (except the Hepa H1* washable).
7
Open the back lid and lift out the filter.
8
Insert a new filter and close the lid.
34
35
36
37
* Certain models only.
38
8
Cleaning the hose and nozzle
The vacuum cleaner stops automatically if the nozzle, tube, hose or filters become blocked and when the dust
container is full. In such cases, disconnect from mains and allow to cool for 0-0 minutes. Clear blockage and/or
replace filters, empty the dust container and restart.
Tubes and hoses
9
Use a cleaning strip or similar to clear the tubes and hose.
0
Hose handle could be dismantled from hose if cleaning is needed.
1
It may also be possible to remove the obstruction in the hose by squeezing it. However, be careful in case the
obstruction is caused by glass or needles caught inside the hose.
Note: The warranty does not cover any damage to the hose caused by cleaning it.
Cleaning the floor nozzle
Be sure to frequently clean the combination floor nozzle.
* Press each wheel-hub and draw away the wheels. Remove dust-balls, hair or other objects that may be
entangled.
* Larger objects can be accessed by removing the connection tube from the nozzle.
Cleaning the turbo nozzle*
Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads, etc. by snipping them
away with scissors. Use the hose handle to clean the nozzle.
* Certain models only.
39
40
41
42
43
44
45
9