ADVANCED Network Devices IPBTN Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Instalasi untuk Beralih ADVANCED Network Devices IPBTN. ADVANCED Network Devices IPBTN 2 halaman. Smart ip button
Halaman Cetak
blink_ms_output_gpio0="500" />
<GPIO_callback
send_activations_only="1" />
<Indicate
indicate_gpo="0"
trying_action="blink"
success_action="pulse" />
REGISTRED SIP CALL
Register the Smart IP Button device to an SIP server
to call an SIP phone or ring a group.
Configuration File Parameters
SIPConfig tag (values included for example):
<SIPConfig
push_to_talk_ip1="301"
/>
Web Server Settings
• Go to Device Settings
• Under SIP GPIO Input Action Settings, set
Push-to-Talk 1 to the SIP extension the button
should call.
•
Select Save and Apply to save changes.
DIRECT SIP CALL
Call a SIP phone directly without registration to a
SIP server.
Configuration File Parameters
SIPConfig tag (values included for example):
<SIPConfig
push_to_talk_ip1="sip:[email protected]"
/>
Web Server Settings
• Go to Device Settings
• Under SIP GPIO Input Action Settings, set
Push-to-Talk 1 to the SIP extension the button
should call.
• Select Save and Apply to save changes.
PUSH AND HOLD SIP CALL
In addition to the Push-to-Talk call, configure a
second action (registered or direct SIP call) to dial
a different SIP extension when holding the button
for a specified time or longer.
Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004
→
SIP.
→
SIP.
• 847-463-2237 •
Configuration File Parameters
SIPConfig tag (values included for example):
<SIPConfig
push_to_talk_ip1_alt="301"
push_to_talk_ip1_alt_ms="2000"
/>
Web Server Settings
• Go to Device Settings
• Under SIP GPIO Input Action Settings, set
Push-to-Talk 1 Alternate to the SIP extension
the button should call when held for the
desired duration.
• Set Push-to-Talk 1 Alternate Hold Time to the
desired duration (in milliseconds) to hold the
button to trigger the call.
• Select Save and Apply to save changes.
HTTP CALLBACK
Send an HTTP GET to IPClockWise or a third-party
software solution.
Configuration File Parameters
GPIO_callback tag (value included for example):
<GPIO_callback
url="http://10.10.7.168:8089/"
/>
Web Server Settings
• Go to Device Settings
• Set GPIO Callback URL to the HTTP string.
• Select Save and Apply to save changes. See the
IPClockWise manual to configure an alert to
trigger on this callback.
RESOURCES
SIP Configuration:
https://www.ipspeaker.com/support30/help/settin
gs.html#sip
User Support:
https://www.anet.com/user-support/
AND Limited Warranty:
https://www.anetd.com/warranty/
Legal Disclaimer:
www.anetd.com/
2
Smart IP Button
(IPBTN) Installation
→
SIP.
→
Servers
https://www.anetd.com/legal/
v2.2