Drill Master 107245 Panduan Petunjuk Pengoperasian - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penggiling Drill Master 107245. Drill Master 107245 16 halaman. Grinding machine
Halaman Cetak- lift station 1 out of the guide hole
- position new station 1 (for different nose grind) at the same location. Insert pin
○
24
- lift clamping plate
the station is completely underneath the clamping plate
○
- rotate pin
20 90° back again and turn the new station 1 slightly to the left and right until the spring
○
loaded pin
20 snaps into the groove on the bottom side of the station
b. exchange of grind station 2
- pull spring loaded pin
○
- loosen knob
19 and swing station 2 to the left until station
○
clamping plate
23
- lift station 2 out of the guide hole
- position new station 2(for different nose grind) at the same location. Insert pin
○
24
- lift clamping plate
station is completely underneath the clamping plate
○
- rotate pin
21 90° back again and turn the new station 2 slightly to the left and right until the spring
○
loaded pin
21 snaps into the groove on the bottom side of the station.
Operation Instruction of Grinding Machine
○
24
○
22 by hand and swing new station 1 to the left until until the clamping face of
○
20 down and rotate
○
24
○
23 by hand and turn new station 1 to the right until the clamping face of the
Page 14 of 16
○
22
○
2 90°to lock it in lowered position
○
2 is no longer clamped under the
○
23
○
25 into guide hole
○
25 into guide hole