AirTechnic LOOP WL125T Pengoperasian dan Perakitan - Halaman 3

Jelajahi secara online atau unduh pdf Pengoperasian dan Perakitan untuk Kipas angin AirTechnic LOOP WL125T. AirTechnic LOOP WL125T 5 halaman. Loop fan

Mounting the fan in vertical position "on a ceiling
or a roof" with direct air outlet outside is
prohibited.
automatically - depending on the model.
Fan models and accessories:
LOOP WL100, WL125 (Standard): the fan is equipped with a block to connect it to power supply. Speed
control is manual - after turning on/o a separate switch or a perimeter light switch.
LOOP WL100T, WL125T (Time Switch): speed is increased after turning on/o a separate switch or a
perimeter light switch. The fan switches to lower gear automatically after 30 min.
LOOP WL100H, WL125H (Humidity): speed is controlled automatically by the humidity sensor and timer:
• the fan changes to the second gear when the humidity level exceed 70%
• the fan changes to the rst gear automatically 15 min after the humidity level is detected to have decreased
below 70%
• if humidity does not exceed 70%, the speed is increased after turning on/o a separate switch or a perimeter
light switch. The fan changes to lower gear automatically after 15 min.
LOOP WL100R, WL125R (Movement Detection): speed is controlled automatically by the fan movement
detector and timer:
• the fan changes to the second gear automatically after presence (in a room) is detected and lasts more than
60 seconds
• the fan changes to the rst gear after 15 minutes since the last presence in a room is detected.
DESIGNATED USE
LOOP series axial extractor fans are designed to support residential building and utility room ventilation. They
are marked by quiet operation and low
energy consumption as well as high reliability and e ciency.
BASIC TECHNICAL DATA
LOOP series fans are support natural ventilation to achieve the required ventilation air ow volume according
to the PN-83/B-03430 norm.
The product is in compliance with the following European directives: The Low Voltage Directive (LVD)
2006/95/EC, Electromagnetic Compatibility (EMC) Directive 2004/108/EC, EMF Directive, RoHS2 Directive
2011/65/EU
Two-speed LOOP series
fans are designed for
continuous operation.
A second speed can be
activated
manually
or