Atlas AA120 Brosur & Spesifikasi

Jelajahi secara online atau unduh pdf Brosur & Spesifikasi untuk Penguat Atlas AA120. Atlas AA120 10 halaman. Strategy series amplifier
Juga untuk Atlas AA120: Brosur (2 halaman), Spesifikasi (3 halaman)

Halaman Cetak

Atlas Sound Infrared Repeater System & Devices

Micro Infrared Repeaters & Flashers

M-1A Series

Atlas Sound IR repeaters allow the operation of virtually any IR-controlled A/V component from multiple

room locations. The

M-1A

repeater will receive the IR signal and rebroadcast it to the small

on the front of each A/V component. The

These micro repeaters feature an attractive, ﬂush, white lens that blends with any white surface. Their high sensitivity

enables use within a 40 foot range with fast reaction time and minimal interference. Repeaters are available installed

on a white decorator-style subplate (cover plate not included) or separately for ﬂush-mounting in a ceiling, wall,

cabinet or speaker grille.

F-1 Series

Small

F-1

ﬂasher LEDs are shipped with an adhesive backing and

all IR-controlled A/V components. Up to six ﬂasher units may be connected to a single

connector blocks or any standard adapter (by others).

M-1CB4B

Note: some high-end A/V components are equipped to accept hard-wired IR signals. In this case, F-1 ﬂashers would not be necessary.

Model

Description

M-1A

IR Repeater

M-1AJW

IR Repeater

F-1

Flasher

* Order Sound decorator-style cover plate separately.

** Order Model M-1A separately.

Stand-Alone IR Repeater System

M-1CB4B

For installation ﬂexibility, the

that provides connections for an

ﬁguration allows IR operation of up to four A/V components from up to four room locations. The

mini jacks for power supply Model

M-1A

repeaters (rooms) in parallel fashion and a data jack for connecting a mini-pin IR source or another M-1CB4B.

The unit's ampliﬁed circuit design supplies clear, strong IR data to source components.

This stand-alone IR repeater system requires: one

every four A/V components, a

PS-M12

which require control of more than four components or transmission from more than four rooms, multiple

blocks may be used.

Note: each M-1A repeater can control a maximum of six F-1 ﬂashers.

A compact UL-listed 12VDC, 200 mA power supply with a 6' cord. The required input voltage is 120V. Supply

PS-M12

includes a

⁄

" mini-plug for direct connection to the

use with up to two switched WhisperTouch

Remote

Range:

Maximum 40'

at 30˚off axis.

800.876.3333

F-1

forwards the signal to the source component's IR receiver.

Current Draw

Style

12 mA

Flush Mount

12 mA

Wall Mount, Supplied on Decorator Subplate*

.05 mA

Surface Mount

M-1CB4B

ampliﬁed connector block is offered as a plug-in interface device

M-1A

Series repeater, four

F-1

ﬂashers, and power supply Model PS-M12. This con-

PS-M12

and up to four

F-1

ﬂashers; it also provides terminals for wiring up to four

M-1A

repeater in each remote room location, one

power supply, and one

F-1

M-1CB4B

connector block (powers up to four

volume controls.

F-1

ﬂasher LED positioned

⁄

" phone plugs for connection to

M-1A

repeater using two

Color

White Lens

White Lens,

White Subplate

Black Lens, Black Cord

M-1CB4B

ﬂasher for each A/V component. For installations

F-1

*(Shown with cover plate,

offers

⁄

M-1CB4B

for

M-1CB4B

ﬂashers) or for

M-1AJW*

M-1A

Sold separately.)

M-1CB4B

PS-M12