Atlas 9KOH Bagaimana melakukan

Jelajahi secara online atau unduh pdf Bagaimana melakukan untuk Sistem Pengangkatan Atlas 9KOH. Atlas 9KOH 2 halaman. Procedure for bleeding the cylinders of all chain-over-roller style lifts

Halaman Cetak
Atlas 9KOH Bagaimana melakukan
PROCEDURE FOR BLEEDING THE CYLINDERS
OF ALL CHAIN-OVER-ROLLER STYLE LIFTS
Current Atlas model chain-over-roller cylinder lifts include:
BP8000, 9KBP, BP9000, BP10000, BP12000, 9KOH, 9OHSC
PERFORM THIS PROCEDURE IMMEDIATELY AFTER INSTALLATION
1. Press the UP Button to raise
the Carriages (part to which
the arms attach inside both
Columns) about 18" off the
fl oor. DO NOT RAISE THE
CARRIAGES TO MAXIMUM
HEIGHT, JUST ENOUGH TO
REMOVE ANY SLACK FROM
THE CHAIN.
2. Disengage the Safety Locks on both Columns using
the Single Point Release Handle near the power unit
or by pulling the two Manual Release Cables located
on each carriage (depending on model of 2 Post Lift
you have). Depress the Lowering Valve handle and lower the arms completely to
the fl oor. Once the lift arms are resting on the ground maintain pressure on the
lowering valve handle for several seconds more.
Single Point Release Handle
(Removing air from the hydraulic system)
and BEFORE YOU PUT A VEHICLE ON THE LIFT
Manual Release Cable
Lowering Valve