Atlas LR10 Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Sistem Pengangkatan Atlas LR10. Atlas LR10 18 halaman.

. OPERATION INSTRUCTIONS

1. Install the oil hose between oil cylinder and power unit, connect with the power supply wire

well. The machine can be ready to use.

2. The roller assy must be disengage when lifting vehicle (See Fig.20).

3. To

raise

and lock the lift: Press the button up till the lift is raised to the required height and the

locks are in engaged (See Fig.18),then push release handle of the power unit, the lift would be

locked.

4. To lower lift Press the button UP, until the safety lock is in the released position (See Fig.19 ),

lower lift by pushing lowering handle.

Move lift: Pull up roller bracket, lock two roller assy to the lift with roller shaft.

(See Fig. 20 & 21 ). Moving the lift by the power unit stand.

Roller Assy. disengaged

Fig.20

Needle Valve adjustment

Loosen lock nut, adjust the knob in clockwise for lowering the lift slowly;Adjust the

knob in anticlockwise for lowering the lift faster. Lock the nut for suitable lowering speed.

Fig.22

Adjusted knob

Lock nut

Adjust knob in clockwise

Roller Assy. engaged

Adjust knob in anticlockwise

Fig.21

Fig.22