Atlas PA702-RMK Petunjuk Instalasi

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Rak dan Dudukan Atlas PA702-RMK. Atlas PA702-RMK 2 halaman. Rack mount kit for amplifier model pa702

Halaman Cetak

PA702-RMK

Rack Mount Kit for Amplifier Model PA702

Configuration #1 - Mounting for one PA702.

1. Remove amplifier from electrical source.

2. Remove the four feet.

3. Align and secure the chassis extension plate to a rack mount ear with the enclosed screws and nuts.

4. Locate the two open holes on each side of the amp located towards the front panel.

5. Align the enclosed rack mount ear and extension assembly to the chassis holes located in step 4.

6. Use the enclosed chassis screws to attach the rack ears and extension assembly to the chassis. Secure firmly, do

not over tighten. Repeat step for opposite chassis side.

7. Disregard extra pieces.

8. Ready for rack installation. Note: It is important the amplifiers have the proper clearance around it for proper heat

dissipation. Always allow at least 1.75" around the amplifier for to assure safe operation. Never mount an

amplifier in an enclosed air tight rack. All racks must have air vents on all sides or forced air cooling to assure

proper heat dissipation.

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •

INSTALLATION INSTRUCTIONS

Specifications are subject to change without notice

AtlasSound.com

Printed in U.S.A.

TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

00406

ATS002689 RevA 03/07