Atlas Copco FlexiROC T20 R Panduan Pengaturan Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Alat Listrik Atlas Copco FlexiROC T20 R. Atlas Copco FlexiROC T20 R 2 halaman.
Juga untuk Atlas Copco FlexiROC T20 R: Panduan Memulai Cepat (2 halaman)
Halaman Cetak
QUICK SETUP
GUIDE
Setting up your hydraulic torque wrench for use is easy.
Please read the included user manual and safety instruc-
tion booklet for additional guidelines.
FOUR BASIC STEPS TO OPERATE YOUR RT-20
1
Scan the code to see a brief overview video on how to use the document or go to
rapidtorc.com/torque_setup
RT-PTCen-RT-20 Copyright Rapid-Torc®. Part of the Atlas Copco Group
All manuals and user guides at all-guides.com
3
2
4
1
WEAR PPE
Wear personal protec-
tive equipment, such as
eyeglasses and steel-toe
shoes.
2
CONNECT HOSES
Make sure the hoses are
free of any defects. The
couplers are on pump
and the tool should be
securely connected.
Place tool on flat surface.
3
CYCLE YOUR TOOL
Turn pump on. Cycle the
tool. Press the "ON' but-
ton on the remote, hold
until tool clicks. Release,
wait for the tool to click.
Repeat the cycle. Ensure
there is no leak.
4
SET PRESSURE
Use the torque conver-
sion chart to set the psi
for the torque you need.
Press the remote's "ON"
button and slowly turn
the pressure regulator
clockwise to reach the
right pressure.
Revised September 2014