ABSCO SHEDS 23151SK-PTX Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Penyimpanan Luar Ruangan ABSCO SHEDS 23151SK-PTX. ABSCO SHEDS 23151SK-PTX 19 halaman.

Halaman Cetak

ABSCO ASSEMBLY INTRODUCTION

The snaptite assembly system locks most perimeter channels to all roof and wall

sheets without the need for tools and fasteners.

PUSH

Position sheets on timbers,

trestles or partly over edge of

concrete slab.

FASTENING SYMBOLS

Join components together by pre-drilling the holes

first. Use one component as a template to mark where

the holes are. Drill with 3mm drill bit.

Join components together with one screw at this

location only, as some channel sections have extra

holes that are not required for this model of garden

shed

Do not join components together at this location yet,

as the screw may obstruct further assembly of other

components

ABSCO INDUSTRIES

Absco Industries

Assembly Instruction Manual

ABSCO SPACE SAVER SHED

Premier Garden Shed

MODEL: 23151SK-PTX

Model: 30152GK

7' W x 5' D x 5'11", 6'10" H

To pre-assemble the four wall panels

and two roof panels, the perimeter

channels are secured to the top and

bottom of each panel using the

snaptite system, as detailed on the

following pages wherever you see

the symbol.

SNAP

T TE

After joining sheets together, position channel over one end of the sheets, gently

tapping it over the snaptite lugs, working along the sheets to the other end.

PUSH

1/8"

ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16

Each perimeter channel must finish flush with the

edges of the sheets.The snaptite system allows

adjustment for this process by simply tapping the

channel along the sheets until each end is neatly

flush. If you need to remove channels from the

panels, pull the channel along the panel from

opposing ends. You may need someone to help

with this.

Model: 23151SK-PTX

INSTRUCTIONS

AND VIDEOS

3mm POP RIVETS

4mm NUT & BOLT SET

3/3/2023

1.3

PAGE 12