Atlas Copco QMT21-25-HM4 Petunjuk Produk - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Produk untuk Alat Listrik Atlas Copco QMT21-25-HM4. Atlas Copco QMT21-25-HM4 16 halaman.

Product Information

■

Installation, Operation and Service Instructions

■

Spare Parts Lists

■

Accessories

■

Please visit: https://servaid.atlascopco.com.

For further Technical Information, please contact your local Atlas Copco representative.

Website

Information concerning our Products, Accessories, Spare Parts and Published Matters can be found on

the Atlas Copco website.

Please visit: www.atlascopco.com.

The Safety Data Sheets describe the chemical products sold by Atlas Copco.

Please consult the Atlas Copco website for more information www.atlascopco.com/sds.

For the Country of Origin, please refer to the information on the product label.

Dimensional Drawings

Dimensions Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.

Please visit:

http://webbox.atlascopco.com/webbox/dimdrw

The MicroTorque screw fastening systems are ultra low-torque applications.

Technical Product Data can be found on either ServAid, or the Atlas Copco website.

Please visit:

https://servaid.atlascopco.com

Bit run out is measured with the tool securely fastened in a test rig and with the tool running at no load

with a rotation speed of 200 rpm. Measuring point is at 44 mm (length of a standard bit) out on a special

bit 4216 2194 00. Bit run out limit is 0.15 mm.

or www.atlascopco.com.

or https://servaid.atlascopco.com.

QMT21-25-HM4