Alert 500S LCD Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alarm Mobil Alert 500S LCD. Alert 500S LCD 13 halaman.

Halaman Cetak

remote Transmission

You are transmitting the signal to

control unit

door Open Warning

Doors are illegally opened (Zone )

Shock Sensor Trigger

Trigger on Shock Sensor (Zone 4)

Time Monitor

Count down Timer

Reminder when time is up for

parking

Vibration Mode

Remote Control vibrates when the

system is triggered

driver paging

Someone is paging you in front of

your vehicle

C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER:

Transmitter Button

Description

F ( second)

LCD screen lamp turns on for

5 seconds

F ( seconds)

Timer Programming Mode

F - F - F

Clear the Flashing Icon and

Melody Sound on the LCD

Screen Transmitter

F - (-second)

Melody / Vibration (

In - range Indicator

Your are within the remote control

range.

Trunk/Hood Trigger

Trunk or Hood is illegally opened

(Zone )

Warn Away Trigger

Trigger on Shock Sensor (Zone )

Alert Alarm

You have set morning call alarm

SAVE power Save Mode

Save the battery power

Button Lock

Disable the transmission function

temporarily

Low Battery

You have to replace the battery of

remote control.

Operation

Press and hold for second

melody sound to confirm

enters

Press and hold for seconds

-melody sounds to confirm

enter

Press within seconds

) Mode Press within seconds

F -

(-second)

Program Count Down (Parking)

Timer (0-Minute / 0M / 0

M /Hour /.5H / .0H)

1. Screen Lamp ON: Press and hold the F button one second, with one melody sound and the

LCD screen lamp will turns on for 5 seconds

2. Clear the Flash Icon and Melody Sound: Press the F button times within seconds will

clear the flash icon and melody sound on the LCD screen transceiver

3. Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will alert user

through melody sound and flashing trigger icon, press any button on the LCD remote transmit-

ter to stop melody sound only.

4. Vibration / Melody Mode: It is useful when you are in a noisy place and

difficult to hear beep sound from the remote control as the remote control

in this mode, vibrates itself if your security system is triggered.

Press the F button first, within seconds press and hold the button

for seconds to select the mode of vibration or melody, the

will displayed on the LCD screen to show the LCD remote transceiver is on

vibration mode.

5. Low Battery Indication: When the power of the battery weakens, it has two short " beep"

sound and flash

icon while pressing the button of the LCD screen transceiver.

6. Set Up Fixed Count down (parking) Timer:

. Press the F button first, within seconds press and hold the

LCD screen will shows icon and timer (ie. 0:0) ,

. Press the

button again showing next order time on the screen ( ie.0:0), press it again

(ie.0:0).....and so on.

. Leave the buttons starting count down then icon flashes

Note:

. The count down period is fixed as 0 minutes, 0 minutes, 0 minutes, hour, .5 hours and

hours maximum.

. When count down timer showing 0:00 means to turn off the timer.

. Press F button for real time indication when the timer is counting down.

Press within seconds to cycle

*leave the buttons starting

count down then

flashes

icon

button for seconds, the