Advanced PureAir Newport ULTRA Petunjuk Penggunaan Manual - Halaman 15

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan Manual untuk Pembersih Udara Advanced PureAir Newport ULTRA. Advanced PureAir Newport ULTRA 19 halaman.

Advanced PureAir Newport ULTRA Petunjuk Penggunaan Manual
Service problems that appear to be major can often be solved easily. You can be your own troublesho-
oter by reviewing this guide.
All other servicing should be done by a local authorized service center.
Problem
Appliance does
not turn ON
Red "REPLACE
FILTER" indicator
has illuminated
Red "CLEAN
CELL" indicator
has illuminated.
Dust collector
cell does not
remove particles
HEPA filter does
not remove dust
Appliance sparks,
Dust collector cell
crackles and pops
Unpleasant smell
Filter & Dust collector cell
in the air outlet
Check
Power cord
Power button
Front cover/Dust
collector cell
Filters
Dust collector cell
Dust collector cell
HEPA filter

TROUBLESHOOTING

Solution
Plug in power cord
Press the power button.
Make sure the front cover and dust collector cell is
securely closed.
Please replace filters and reset the timer. Refer to
instructions on page 7&9.
Please wash collector cell and reset the timer. Refer to
instructions on page 7&9&11.
Dust collector cell gets too dirty, please clean
Dust collector cell may be damaged
Dust collector is not completely dry after cleaning
Wiring is not assembled well or broken. Contact authorized
service center.
The front and back of the HEPA filter been mistakenly
reversed
The HEPA filter has been saturated with a serious amount
of dust.(Usually dark grey in color). Please replace filter.
Sparking or poping noise (arcing) can occur when
a large particle is captured in the collector cell or
appliance is used in over damp rooms. If the
appliance is arcing excessively, the cell may be
dirty. Try cleaning the collector cell.
If excessive arcing continues after proper cleaning,
the collector cell may be damaged. If damaged,
contact authorized service center.
If filter gets too dirty, please replace
If dust collector cell gets too dirty, please clean
13