Airtecnics Cyclohnic Panduan Pemasangan, Pengoperasian, dan Pemeliharaan - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Pengoperasian, dan Pemeliharaan untuk Pembersih Udara Airtecnics Cyclohnic. Airtecnics Cyclohnic 20 halaman. Purification unit
Halaman Cetak
FAULTS ANS SOLUTIONS
Electrical feeding
If the equipment does not work, the error is most likely due to an incorrect terminal power
supply.
1 - Check that it has been connected to a functional electrical outlet.
2 - Check that the current is compatible with the equipment and that the terminal block ca-
bles are connected according to the electrical diagram specified in this manual.
3- Check that voltage (230Vx1) reaches the equipment. If not, check the power cables.
Considerations:
- If the equipment stops recirculating air, check the level of the cyclone filter tank. If it is com-
pletely full, it must be emptied so that it can perform the function and allow air to circulate
through the equipment.
- If, once the tank has been emptied, the fan still does not work, it must be replaced with a
new one.
- If the UV light does not work, but the rest of the components do, check that the cables of
the UV Source are correctly connected.
- If the fan turns but does not blow air and the cyclonic filter tank is empty, the G4 filter must
be changed.
17
Instructions manual - Purificator Cyclohnic