Bose FreeSpace 360P Panduan Servis - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Servis untuk Pembicara Bose FreeSpace 360P. Bose FreeSpace 360P 7 halaman. Environmental speaker
Juga untuk Bose FreeSpace 360P: Panduan Pemilik (12 halaman), Instalasi (3 halaman), Panduan Servis (9 halaman)
Halaman Cetak
Test SetUp
70V version: Apply the positive input signal to
the red wire and the negative to the black wire.
100V version: Apply the positive input signal to
the yellow wire and the negative to the black
wire.
Connect the orange (80W) tap wire to the white
wire. After testing, return the tap setting to what
the customer had set the unit to. See sche-
matic diagram below.
1. Phase Test
1.1 Apply 8 Vdc to the speaker input terminal.
1.2 The driver should move outward.
2. Air Leak Test
2.1 Apply a 35 Vrms, 80 Hz signal to the
speaker input terminal. (Use 50 Vrms for 100V
units)
2.2 Listen for air leaks around the driver, top
cap, and base seams. Repairs can only be
made to the driver.
RED
70V
YELLOW
100V
BLACK
COM
WHITE
COM
ORANGE
80W
GREEN
40W
VILOT
20W
BLUE
10W
Note: The transformer and crossover components are not accessible for repair or replacement.
Test Procedures
3. Rub and Tick Test
4. Sweep Test
TRANSFORMER
PINK
OR
BROWN
CONNECTOR
R1
6.2 Ohm
C1
15uF
L1
1.5mH
BLACK
R2
2.7 Ohm
C2
33uF
Figure 2. Schematic Diagram
4
FS360P II Environmental Loudspeaker
3.1 Apply a 35 Vrms, 10 Hz signal to the
speaker input terminal. (Use 50 Vrms for 100V
units)
3.2. No extraneous noises such as rubbing,
scraping or ticking should be heard. To distin-
guish between normal suspension noise, rubs
and ticks, displace the cone of the driver with
your finger. If the sound can be made to go
away or get worse, it's a rub or tick and the
driver should be replaced. If the noise stays
the same, it's normal suspension noise and
will not be heard with regular program mate-
rial.
4.1 Apply a 35 Vrms, 80 Hz signal to the
speaker input terminal. (Use 50 Vrms for 100V
units). Sweep the speaker from 80 Hz to 5
kHz.
4.2 Listen for buzzes, rattles or other extrane-
ous noises from the driver or cabinet.
L1
RED
R1
C1
R2
70V 80W 40W 20W 10W
100V
PTC
BLACK
C2
+
-