Atlas Copco PHE 3X Instruksi Perbaikan - Halaman 9

Jelajahi secara online atau unduh pdf Instruksi Perbaikan untuk Bor Atlas Copco PHE 3X. Atlas Copco PHE 3X 14 halaman.

Assembly

Note

Please additionally secure all screwed connections in metal with screw locking device.

Mounting the

1 Fit the centering ledges (3) to the field (2)

field

(take care of the right position, see

illustration).

2 Insert the field (2) into the field housing

(1) (lightly hit the field housing with a

plastic hammer).

3 Insert the silicone buffer (4) into the air

supply ring (5).

4 Insert the air deflector plate (5) (take care

of the right position, see illustration).

Assembling and

1 Push the bearing (6), the washer (4) and

mounting the

the seal ring (5) (take care of the right

armature

position: the small boring faces the

toothed gear) onto the armature shaft and

press on the toothed gear (3) as fas as

will go.

2 Insert the complete armature (7) into the

field.

3 Push the silicone buffer (2) onto the field

housing.

4 Fix the angle (1) in the field housing.

5 Push the seal ring (9) onto the field

housing.

Mounting the

1 Insert the motor (4) into the motor

motor

housing (2) (take care of the right

position: the lug (3) must fit into the relief

of the motor housing).

2 Fasten the motor with screws (1) and (5)

(2,5 Nm).

Repair Instruction No. 175.8/95

PHE 3, PHE 3X

PAGE