Atlas Copco PHE50H Petunjuk Perbaikan - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Perbaikan untuk Bor Atlas Copco PHE50H. Atlas Copco PHE50H 15 halaman.
Halaman Cetak
1
Removing the
On both sides, loosen the screw (4) and
electric
remove the cover (3).
components
2
Loosen the screw (A).
3
Lever off the Softgrip (8) from above since
it is fitted at the top (see arrow in illustra-
tion).
4
Loosen the screws (6) and detach the ca-
ble clamp (5).
5
Lay bare the connection cable (9) with the
switch (7). Branch off the connection cable
from the switch (7).
6
Loosen the screw (1) and detach the
service-LED-module (2).
1
Dismantling the
Undo the six screws (1) (screws are se-
nosepiece
cured, therefore tight). Remove the nose-
piece (2) as well as the grease seal (A).
2
Remove the seal (9), bearing (6),
O-ring (7) and sleeve (8).
3
Press out the lever (B) with aid of a press
in direction of arrow.
4
Remove the bolt (5), spring (4) and
sleeve (3).
Repair Instructions No.184.11/98
3
4
A
2
1
5
4
PHE 50 H
7
5
6
6
7
8
3
A
9
2
1
B
PAGE
2
8
9
3
4