Atlas Copco TEX 10PS Manual - Halaman 18

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Atlas Copco TEX 10PS. Atlas Copco TEX 10PS 20 halaman.

Atlas Copco TEX 10PS Manual
TEX 3, 05P, 09PS, 10PS, 12PS

Technical data

Machine data

Shank
dimension
Type
TEX 3
H19 x 50
TEX 05P
H19 x 50
TEX 05P H/R
H14.7 - R17.3 x 60
TEX 05P R
R17.3 x 60
TEX 09PS
H22 x 82.5
TEX 09PS KL
H22 x 82.5
TEX 09PS KL US
H22 x 82.5
TEX 09PSR
R25 x 75
TEX 10PS
H22 x 82.5
TEX 10PS KL
H22 x 82.5
TEX 10PSR
R25 x 75
TEX 12PS
H22 x 82.5
TEX 12PS KL
H22 x 82.5
TEX 12PS KL US
H22 x 82.5
TEX 12PSR
R25 x 75
TEX 12PSR KL
R25 x 75

Noise and vibration declaration statement

Guaranteed sound power level Lw according to ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to ISO 11203.
Vibration value A and uncertainty B determined according to ISO 20643. See table "Noise and vibration data"
for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the machine.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at http://www.humanvibration.com/EU/VIBGUIDE.htm
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
© 2010 Atlas Copco Construction Tools AB | No. 9800 0799 90 | 2010-01-01
Original instructions
Weight
(mm)
(kg)
3.7
5.5
5.5
5.5
10.1
11.9
11.9
10.1
10.2
10.7
10.2
10.6
12.3
12.3
10.6
12.3
Safety and operating instructions
Length
Impact freq.
(mm)
(Hz)
310
68
380
46
380
46
380
46
500
30
495
30
495
30
500
30
520
22.5
500
22.5
520
22.5
540
25.5
540
25.5
540
25.5
540
25.5
540
25.5
Air
consumption
(l/s)
6.9
9.5
9.5
9.5
18.5
18.5
18.5
18.5
17
17
17
22
22
22
22
22
21